Cold Applied Tape
Cold applied Polymeric film coating System is a multi layer coating tape system designed for the corrosion protection of pipelines operating in highly corrosive environments and exposed to high mechanical stresses that may be present particularly on large diameter pipes.
Types of cold applied tape coating system.:
- Two ply /Two ply coating system.
- Three ply /Two ply coating system.
- Water pipeline coating system.
Cold applied tape system consists for the following.
- Primer or Liquid Adhesive layer
-
- Organic solvent
- Asphalt / elastomer solids
- Inhibitors
- Anti-corrosion layer
-
- Polymeric film
- Pressure sensitive adhesive
- Mechanical protection layer
-
- Thicker polymeric film
- Pressure sensitive adhesive
- In field pipe coatings (new & rehab)
- Joint protection coatings
- Coatings for Tee’s, Flanges, Valves
- In Plant applied pipe coatings
- Special off-shore joint coatings
- Fully certified to the DIN 30672 and EN12068 & AWWA C214
- Very good adhesion
- Chemical resistance.
- Impact resistance
- Non-Hazardous, Simple application.
- Worldwide reference list.
- Impermeable to oxygen and moisture
- Tough Mechanical properties of outer layer provide during handling & installation.
- Low cathodic protection – current requirement.
- Max operating Temp 65 to 85 deg cel.
- Applied on any pipe size.
- System can be easy for repair.
- Total Coating System contains no materials which are in violation of OSHA or EPA regulations.
- EN12068 C60UV /C80UV
- AWWA C 214
- DIN 30672
- Supply : Cold applied tape is supplied in form Rolls along with Primer
- Roll Width : 2”, 4”, 6”, 12”
- Thickness : 15mils to 32mils
- Length : 15Meter,30Meter
For proper installation and performance please refer our installation instruction
Installation of the Cold applied tapes system should be carried out by SNI INDIA certified personnel