SNI INDIA supplying “PROTEGOL” Polyurethane coating of M/s TIB Chemicals-Germany. It is 100% Solid solvent free ,two component ,high build polyurathene coating. It is having high abrasion and impact resistance. Also it is having fast curing and short reaction time

This coating systems is used to prevent corrosion of OIL & Gas pipelines, Tanks, valves, fittings, water treatment facilities and power plants.

• Feature highly economic characteristics such as fast curing and short back-in-service times with excellent performance characteristics under a wide range of environmental conditions.
• Ideal for in-situ applications like coating rehabilitation.
• A high-performance product
• A single layer coating system. Easy to apply
• International track record. Approved for more than 50 years
• can be applied in a variety of ways: from plural component airless hot spraying for large areas to conventional air-assisted spraying and manual application by brush or roller, which is most suitable for repair work and small or limited accessible areas.
• The Pioneer in rehabilitation and field joint coating projects Specified with major organizations such as Gaz de France, Gazprom, ENI, IOCL, EIL, EON, Schuck Germany, RMA Germany, AVK Denmark, Böhmer Germany, OMS-Saleri, Camero Valves-Italy.
• solvent-free coating systems offer reliable protection against corrosion attacks even under severe soil stress conditions.
• comply with DIN EN 10290 and DIN EN 10289 standards.
• product portfolio includes systems which have been awarded potable water certification.
• corrosion protection systems have excellent bonding properties to steel and cast iron substrates and are extremely abrasion and chemical resistant.
• have been designed and formulated to be applied individually without the need for a primer
• Our polyurethane coatings, due to their high abrasion resistance, can be applied as a first line of defense in HDD sections, as both a single and supporting protective coating over FBE.
• coatings can be applied within a wide temperature range without the need for per-heating or post-curing.
• can be applied and operated as non-shielding (fail/safe) coatings which do not impede CP systems.

DIN EN 10290

DIN EN 10289

DIN 30677

AWWA C210 /222

IOCL/BPCL/HPCL/GAIL/BORL/ONGC/NTPC

Minimum Thickness = > 1000 micron

Color: Black / other on request

Volume solids: 100%

Mixing ratio: Refer data sheet.

• Drum :
  • • Part A : 300 Kg
    • Part B : 250 Kg

Drum size can be supplied against Customer specific requirement

• Kits : Also supplied into kits as per customer requirement.

Before application all steel surfaces should be clean, dry and free from dust, oil gas, paint. Abrasive blast cleaned to NEAR WHITE as per ISO standard SA2 ½, SSPC-10, SSPC-SP5, NACE 2 and equivalent to give a nominal 50-100 micron profile. Coating is applied by plural feed airless two component hot spray machine to the required thickness on the substrate.